Desktop Tablet Holder
What is it?
A lockable Desktop tablet holder which can be adjusted on four sides to hold tablets ranging from a minimum of 220 x 160mm to a maximum of 245 x 180mm, 9mm maximum thickness. If the tablet is to be permanently powered, power lead must connect in the centre of one of the short sides. Please check the size of your tablet before purchasing!
- The system consists of a lockable white moulded plastic enclosure, with adjustable sliding foam inserts to cater for varying sizes of tablet. There is a hole for the power lead on the short side, opposite the lock so please ensure this would work with your particular tablet before purchasing.
- The enclosure can be attached to the head bracket in either a fixed portrait or landscape orientation and then attached to the silver aluminium post. The post has a hollow centre for your power lead if required and bolts to the black aluminium cast base where it can be fed underneath and out the rear. The base has 3 holes for screwing the unit to a desk / table-top (fixings supplied) and includes black plastic covers for a stylish finish.
Secure Enclosure
Slide the cover off, place your tablet within the enclosure (adjusting the soft grips on each side for a snug fit), then refit the cover and lock into place.
Concealed Fixing
The black aluminium base has 3 positions for securing through and into the desk / table-top, these are then covered with gloss black plastic covers to give a smooth attractive appearance.
What’s in the Box?
The tablet enclosure, post and base are packed separately in polybags within a thick protective plain cardboard box. All instructions, fixings and tools are included and the unit takes only 10 minutes to put together, 2 Keys are provided. Overall box dimensions and weights are 40 x 31 x 7cm, 2.5Kg. Tablet NOT supplied. 2 year warranty applies.
Specifications
Height
Portrait – 490mm
Landscape – 440mm
Footprint
370 x 280mm
